Degradation of monofluorophenols in water irradiated with gaseous plasma

Decomposition of aqueous monofluorophenols (MFPs) was investigated by contact glow discharge electrolysis (CGDE). During CGDE, both MFPs and the corresponding total organic carbon (TOC) in water were consumed smoothly, suggesting that carbon atoms of benzene nucleus could be eventually mineralized to inorganic carbon (IC). And all the fluorine atoms in the MFPs were equally converted to fluoride ions. Based on the primary intermediates from each starting materials, it showed that aromatic hydroxylation preferentially occurred at the para- or ortho- position to the phenolic OH group of each MFPs. The disappearance of both MFPs and TOC followed the first-order rate law. The apparent rate constants for the decay of MFPs were independent from the pK_a values of MFPs.     

石化企业玻璃钢设施静电特性及安全使用

通过测试玻璃钢设施的静电参数,研究分析玻璃钢设施的静电特性,表明玻璃钢设施有较大的静电危险性,提出了一般防静电措施,预防玻璃钢设施的燃爆风险。     

“水解酸化+接触氧化”工艺在小型企业中成药废水处理中的应用

介绍了"水解酸化+接触氧化"工艺处理具有污染物浓度高、水质水量波动大等特点的某小型企业中药废水实际工程。监测数据表明该工艺处理效果稳定、可靠,出水指标达到GB 8978—1996《污水综合排放标准》医药原料药二级标准。     

微电解接触氧化系统处理水源中2-氯酚研究

在微电解接触氧化系统中,研究了2-氯酚的降解特性和机理。在酸性溶液中,2-氯酚的降解效率比其在中性和碱性溶液的高。向其中加入活性炭,由于表面催化的作用使得2-氯酚更易降解。溶液中的溶解氧参与电极反应并促进2-氯酚的降解。降解产物有1,2-苯二酚、丙三醇、草酸和乙酸。通过对中间产物的分析,提出了2-氯酚可能的降解途径。     

非离子表面活性剂对污泥调理脱水效果的影响

现有污泥脱水技术仅使污泥含水率降到80%左右,难以满足日益严格的污泥处置要求.以污泥比阻（SRF）、脱水率为考察指标,比较了两大类非离子型表面活性剂（辛基酚聚氧乙烯醚OPEO型和烷基糖苷APG）对剩余污泥的脱水效果,并对原泥及调理后污泥进行了显微观察.结果表明,非离子表面活性剂可使污泥絮体粒径变小,不规则程度降低,改善了污泥的脱水性能,而且烷基糖苷APG脱水效果优于OPEO型.APG投加量为0.05%干固体时,污泥比阻即可降低到原泥的42%,脱水率可达到93%.以烷基糖苷APG为调理剂进行板框脱水实验,结果表明,当APG投加量为0.05%干固体时,脱水泥饼含水率比原泥脱水泥饼含水率低约10%,脱水率可达到97%.本研究为APG应用于污泥脱水,改善污泥脱水性能提供一些参考.     

FCR多级接触氧化系统处理乳品工业废水的研究

为提高乳品工业废水生物处理的去污脱氮能力,以新型螺旋状纤维填料作为载体,采用多级氧化槽内不同种类微生物形成的食物链系统（food chain reactor）,详细考察了不同水力停留时间COD、TN、NH^＋₄-N、TP等的去除率及其去除机理,并对污泥减量化效果进行了初步探讨.结果表明,当进水COD为842～1 843 　mg/L、TN为36.3～92.2 　mg/L、NH^＋₄-N为30.1～52.1 　mg/L,HRT=6　h时,系统COD的平均去除率达到93.3%;TN和NH⁺₄-N的去除效果显著,其平均去除率分别达到73.3%和80.7%,出水COD、TN、NH⁺₄-N平均值分别为79.4　mg/L、9.6 　mg/L、6.1　mg/L,均低于《污水综合排放标准》（GB 8978-2002）的一级标准.该系统不仅具有较高的去污脱氮效果,而且产生的剩余污泥量极少,其污泥产率的平均值为7.7%.该系统运行费用低,操作管理方便,长期运行稳定,可应用于城市污水、中高浓度有机废水（如餐厅污水、食品工业废水）等的处理.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

Effect of sulfate on the methanogenic activity of a bacterial culture from a brewery wastewater during glucose degradation

The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading basis. Batch experiments were conducted in serum bottles at pH 7 and 35℃. A comparison of the values indicates that the SMA of this mixed culture was increased and reached its highest level of 0.128 g CH4 gas COD/（g VSS.d） when biomass was in contact with sulfate at a ratio of 1：0.114 by weight.     

Treated wastewater irrigation effect on soil, crop and environment： Wastewater recycling in the loess area of China

A study was carried out at the Loess Plateau in Dongzhi,China,to test the feasibility of using secondary treatment sewage effluent and to determine whether the water quality would then meet the recommended irrigation norm.Seven crops,including celery,wheat, maize,millet,apples,rapeseed and yellow beans,were tested in the study.Physical and chemical properties of the soil,crop yield and quality and leachate at different soil depths were measured.In most cases,the quality of the crops that made use of treated sewage was not distinctively different from those that did not use treated sewage.However,yields for the former were much higher than they were for the latter.Leachates at different soil depths were analyzed and the results did not show alarming levels of constituents.For a period of approximately 14 months,the treated sewage irrigation had no significant effect on the loess soil and no cases of illness resulting from contact with the treated sewage were reported.With treated sewage irrigation,a slight increase in the organic content of the soil was observed.     

Review of the remediation strategies for soil water repellency

Many regions of the world are predicted to experience water scarcity due to more frequent and more severe droughts and increased water demands. Water use efficiency by plants can be negatively affected by soil water repellency (SWR). It is timely to review existing techniques to remedy SWR. Ideally remediation addresses the origins of a problem. However, the fundamental mechanisms of how and why SWR develops are still poorly understood. In this review it was hypothesized that SWR occurs where the balance of input-decomposition of organic matter is impaired, due to either increased input or decreased decomposition rates of hydrophobic substances. Direct and indirect strategies to remedy SWR were distinguished. While direct remediation aims at abolishing the causes of SWR, indirect strategies seek to manage sites with SWR by treating its symptoms. The 12 reviewed strategies include applying surfactants, clay, slow-release fertilizers, lime, and fungicides, bioremediation of SWR through stimulating earthworms, choosing adapted vegetation, irrigation, cultivation, soil aeration and compaction. Some of the techniques have been applied successfully only in laboratory experiments. Our review highlights that it is not straightforward to cure SWR based on easily measurable and site-specific soil and vegetation properties, and that long-term, large-scale field experiments are required to improve the understanding of the evolution of SWR as cornerstone to develop cost-effective and efficient remediation strategies. We also identified current research gaps around the diagnosis and prevention of SWR.